The LED K19 waterproof connector could be instrumentation that will be applied to the surroundings with water and may guarantee the inner mechanical and electrical properties of the High Voltage K19 waterproof connector underneath sure water pressure. Thus, what's the process of K19 waterproof connector-related content? Let's take a glance next.
Here is that the content list:
Internal semiconductor shielding treatment
Treatment of external semiconductor shielding
Treatment of cable reaction force cone
Internal semiconductor shielding treatment
If the High Voltage LED K19 waterproof connector body has an Associate in Nursing inner shielding layer, the inner shielding layer of the conductor a part of the crimping tube should be renovated once the instrumentation is created. A region of the inner semiconductor shielding of the cable should be put aside to create the LED K19 waterproof connector on the connecting tube within. The shields will communicate with one another to confirm the continuity of the inner semiconductors so that the sphere strength at the joints is equally distributed.
Treatment of external semiconductor shielding
The outer semiconductor protection of the Screw Terminal High Voltage K19 waterproof connector could be a semi-conductive material that acts as a homogenous force field outside the insulation of the cable and also the cable joint. Just like the semiconductor protects within the High Voltage LED K19 waterproof connector, it plays a vital role within the cable and also the joint. The external semiconductor interface should be neat and unified and need to make a wavy transition with the insulator. In addition, the LED K19 waterproof connector and the semiconductor tape are connected to the semiconductor protection device outside the wire.
Treatment of cable reaction force cone
The screw terminal High Voltage K19 waterproof connector has a reaction force cone whose shape and overall structure are correct. The potential distribution on the entire cone is equal. After creating the cross-linked cable reaction cone in the LED K19 waterproof connector, it is usually squared with a special cutting tool. So how do we use this tool? Heat it slightly over low heat, then chop it with a sharp knife. After the basic setting, scrape with 2mm thick glass, and finally use sandpaper from coarse to fine until it is shiny.
Shenzhen Beite Electronics Co., Ltd was based in 2008 years that is found in Guangdong province. With advanced producing technology, specializing within the production of the waterproof instrumentation, waterproof plug, air plug, diode instrumentation, DC waterproof line, power line, terminal instrumentation, AV cables, automobile cables. it's widely used for cars, light, pleasure-boat, industrial instrumentation, and then on. The higher than is that the connected content of the K19 waterproof connector-related content process. If you're fascinated by Screw Terminal K19 waterproof connector and fascinated by the instrumentation, you'll be able to contact us. We will provide you with detailed content consultation and give you an in-depth understanding of the product. Our website is www.bett-connector.com. Looking forward to your visit and hope to join forces with you.
